IMPORTANT: The Lord-Matic has the quickset day-date (QS) and can be hand-wound, and is with hacking function. However, all LM calibres have the plastic component prone to wear in the QS mechanism, which is however serviceable at vintageseiko.nl (!) when it breaks because of inexpert usage.

This watch has no problems, naturally, just make sure to always adjust the day-date at the end of the day at around 18:15 PM because for all Lord-Matics careful treatment is required to spare the plastic quickset parts inside. So, only use the quickset at 18:15u and be sure that the watch is at that time by turning it once past the date switch and then again to 18:15u.

The day quickset is very smooth, the date quickset has more firm resistance because of the inner mechanics. Increase pressure carefully to switch and then pause slightly before going on to the next date (if at all necessary).

The Lord-Matic 5216 however is an upgrade, it has a spring-loaded pawl to eliminate the risk of breakage if the date is changed around midnight. Because this was only the second bi-directional automatic winding movement ever produced by Seiko, it has some quirks. The reverse winding gear remains engaged when the date quickset is used, causing extra drag and causing concern for some users. The early 5206 version also suffers from a date pawl that can be broken if the date is set late at night, a common issue for many watch movements.

The Seiko Lord-Matic Special, Daini division edition,  has the King Seiko 52 base movement (a high end automatic that was thinner then all other auto’s of the time). Notice the mention of A at the end of the caliber inscription on the back, it refers to the accuracy grade A, as these LM's were with higher quality and accuracy specs.

This Lord-Matic is large at 36mm and it has a 28800 beat rate as opposed to the regular LM's 21600, offers quick set day and date, hand winding and the ability to precisely set the seconds though a hacking lever. It has of course a much smoother sweeping seconds action.

The 56 stream seems to have been developed between two other caliber streams, the 51 (starting in 1967), and the 52 (starting in 1970). When the 51 was developed, it had a thickness of 4.9mm. The 56 had a reduced thickness of 4.3mm, and the 52 further reduced the movements thickness to 3.9mm.

In this continuing effort to reduce the thickness of its mid to high grade movements, many novel design elements were incorporated into this 5216.

At the beginning of their roughly ten year production run, during the late 1960's till 1970's, the Lordmatics were a one piece design ( this one is not) in that you could only remove the movement from the front, thereby increasing the water-proofing. For maintenance of the watch, it is opened through and by removing the acrylic glass.

Although the 56 series was later upgraded and used in some chronometer grade King Seiko's, I find it sad that it was not chosen for the task when Seiko made the decision to resurrect the 52 series as the 4s15, with all of its siblings. I really think Seiko was approaching the epitome of automatic movement design in this caliber, and the 4s series is a compromise of some excellent ideas

This JDM edition then, English and Kanji (Japanese) day, is still moving flawlessly after a Seiko shake with a day difference within COSC. The wow factor is very much present with this one. On the inside this watch is no less impressive in this day and age. The calendar changes accurately (and immediately) on the 24 hour mark and the crown works fine adjusting the day of the week or time. Of course, this Lordmatic has the quickset day-date (QS) and can be hand-wound, and is with hacking function. However, all 52/56 LM calibres apart from the 5601 do have the plastic component prone to wear in the QS mechanism, which is often inoperable. Here no problems naturally, just make sure to always adjust the day at the end of the day at around 6 PM.